ECAM panel back pins

Electronic Centralized Aircraft Monitoring (ECAM) control panel is located at the front center of the pedestal, above the throttle. Panel consist of 18 keys (system page and other) and two potentiometers for upper and lower ecam displays brightness.

If you to choose to bypass internal electronics here are the pins for ECAM control panel front panel only.

ECAM_panel_pin-out.pfd

I am not immune to mistakes so there could be some errors and typos on those diagrams (if you see any mistake or typo please let me know)! Therefore use them with a measure of common sense and don’t forget you are using pin-out diagrams at your own risk! In no event shall I be liable to any user or third party for any damages whatsoever resulting from the use or inability to use this website or the material and content provided on this site. Please don’t use diagrams commercially and publicate or distribute them without permission.

Here is ECAM panel working with JeeHell software.

* If you are using a new type ECAM control panel, the one with LEDs, there are some changes regarding polarity! LEDs need a positive on pin 54 and ground on selected light pin (2, 4, 9, 10-20) and also ground on pin 1. The problem you might have with that is losing separate grounds for inputs and outputs (switches also use ground on pin 1)!

** Thanks to Christopher (CockpitConcept) and Ben you can also interface ECAM with ARINC 429 boards.